Print option missing

Post here if you have problems installing or using doPDF.
croy
Posts: 2
Joined: Sun Feb 01, 2009 7:07 pm

Postby croy » Mon Feb 02, 2009 5:11 am

Installed the latest version into XP Pro & reboot. Attempted to print but do not see doPDF?

Then uninstalled, only dopdf6.ctm was left behind, deleted it, reboot and reinstalled, reboot.

Same, no doPDF option from various progs, e.g. Word, Notepad, etc.

I have three other printers and all running normally.

I used doPDF v5.2.226 some years ago but uninstalled because it couldn't embed fonts.

Anything else I need to do to activate/install doPDF6?

Any suggestions most welcome.



Softland
Posts: 1476
Joined: Thu May 23, 2013 7:19 am

Postby Softland » Mon Feb 02, 2009 12:41 pm

If version 5 worked, so should 6. Please see this troubleshooting guide http://www.dopdf.com/forum/topic/dopdf-does-not-appear-in-the-printers-list-after-installation



croy
Posts: 2
Joined: Sun Feb 01, 2009 7:07 pm

Postby croy » Fri Feb 06, 2009 12:41 am

Thanks Softland. I've copied framedyn.dll to system32 folder and also checked that path to wbem is as required. Done another uninstall/reboot/install/reboot.

Success at last.




Return to “Troubleshooting”