doPDF Forum

doPDF Forum » Troubleshooting

1. YelikA
   

   Member
   Joined: Feb '10
   Posts: 9

   I have AutoCAD 2005, doPDF 7.1(326) on WinXP SP3. So, i want save pdf-file from my draw(2480x458) in autocad. My steps:

   

   

   

   

   

   Posted 1 year ago #

2. Softland
   

   Key Master
   Joined: May '08
   Posts: 1,013

   hi, what happens if you print to dopdf but without setting a custom size in dopdf, just leaving the dimensions to be set by autocad 2005?

   Posted 1 year ago #

3. YelikA
   

   Member
   Joined: Feb '10
   Posts: 9

   Softland
   Standart Autocad set paper size A4(297x210), but my draw has 2480x458, so i can see a little part of my draw on A4. I need scale 1:1!

   Posted 1 year ago #

4. Softland
   

   Key Master
   Joined: May '08
   Posts: 1,013

   hi, can you send to support[]novapdf[]com the autocad file you had problems with so that we could test this too? thank you.

   Posted 1 year ago #

5. YelikA
   

   Member
   Joined: Feb '10
   Posts: 9

   Hi, look in your mail.
   But in fact, it does not matter which autocad draw use. I was trying other files(with big-size drawings) with same result :(

   Posted 1 year ago #

6. Softland
   

   Key Master
   Joined: May '08
   Posts: 1,013

   thank you, we'll look into this.

   Posted 1 year ago #

7. YelikA
   

   Member
   Joined: Feb '10
   Posts: 9

   hi, how about this bug? did you look at it?

   Posted 1 year ago #

8. Softland
   

   Key Master
   Joined: May '08
   Posts: 1,013

   yes it is a bug, we'll have it corrected in a future build.

   Posted 1 year ago #

9. YelikA
   

   Member
   Joined: Feb '10
   Posts: 9

   Softland how about this bug, when do you plan fix it?

   Posted 1 year ago #

10. YelikA
    

    Member
    Joined: Feb '10
    Posts: 9

    New version out doPDF 7.1(367) and this bug did not fixed yet... :(

    Posted 7 months ago #

11. Softland
    

    Key Master
    Joined: May '08
    Posts: 1,013

    Hello,

    We have tested the issue with the latest doPDF version and i can confirm it is working fine.

    I will reply to your mail address with the screenshots we have made with the tests.

    Posted 7 months ago #

12. YelikA
    

    Member
    Joined: Feb '10
    Posts: 9

    Softland
    As I reply to your mail, first of all try test this issue with scale 1:1 in Autocad ;)

    Posted 7 months ago #

13. Softland
    

    Key Master
    Joined: May '08
    Posts: 1,013

    Hi,

    We have replied to the e-mail.

    Unfortunately this is beyond us as it is the way Autocad handles the scaling you are trying to print with.

    Than you for understanding.

    Posted 7 months ago #

Reply

You must log in to post.